|
Part Number: 2242 Volvo Crank Holding Tool
|
- Keeps the crankshaft pulley from turning when changing the timing belt and/or crankshaft seal
- Designed to withstand the torque specs for the crank bolt
- Services Volvo 240s (1985 - 1993)
GÇïBasic Instructions: Removal: - Remove the engine drive belt.
- Use the Crankshaft Pulley Holder, to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
- Remove the crankshaft balancer bolt. Discard the bolt.
- Remove the crankshaft balancer.
Install: - Install the crankshaft balancer.
- Install a NEW crankshaft balancer bolt.
- Use the Crankshaft Pulley Holder to prevent the crankshaft from rotating while tightening the crankshaft balancer bolt. Tighten the bolt to Manufacturer recommended ft. lbs.
- Install the engine drive belt.
Application Chart: Make | Model | Trim | Engine | Year | Volvo | 240 | Base | 2.3L | 1990-1993 | Volvo | 240 | DL | 2.3L | 1990 | Volvo | 240 | SE | 2.3L | 1991 | Volvo | 244 | DL | 2.3L | 1985-1989 | Volvo | 244 | GL | 2.3L | 1985-1989 | Volvo | 245 | Base | 2.3L | 1985 | Volvo | 245 | DL | 2.3L | 1986-1989 | Volvo | 245 | GL | 2.3L | 1986-1989 | Volvo | 740 | Base | 2.3L | 1989-1992 | Volvo | 740 | GL | 2.3L | 1989-1990 | Volvo | 740 | T | 2.3L | 1991-1992 | Volvo | 740 | GLE | 2.3L | 1985-1988 | Volvo | 745 | GLE | 2.3L | 1985 | Volvo | 760 | Base | 2.3L | 1985, 1989-1990 | Volvo | 760 | GLE | 2.3L | 1985-1988 | Volvo | 780 | Base | 2.3L | 1989-1991 | Volvo | 940 | Base | 2.3L | 1993-1995 | Volvo | 940 | T | 2.3L | 1991-1995 | Volvo | 940 | SE | 2.3L | 1991 | Volvo | 940 | GL | 2.3L | 1992 |
|
|
|